They say the kitchen is the heart of the house. If it is so, the chimney keeps your kitchen smokeless and odorless. What can be a better way to keep a check on the health of your loved ones?
Have you already bought a chimney and looking for a better way to get it installed? If yes, then we have got you covered.
Most of the chimney sellers offer installation services at a slightly extra cost or free, but, having some knowledge about the process will help you judge the accuracy of their work. Also, most of the chimneys are accompanied by plastic ducts which are not durable at all. They are most likely to break after a few months of usage.
That is why; it is advised to buy the required duct pipe and get it installed in the first go. However, check the specifications and type of the best kitchen chimney in India 2021 before buying the duct pipe.
Read on to Know More About the Kitchen Chimney Installation.
Minimum Required Tool List
This is not a complicated process and can be easily done with the help of simple tools. One needs access to the following tools in order to carry out the installation on his own.
- Measurement tape
- Marker pen
- Tools provided with the chimney
There are Some Other Factors that You Need to Look For:
Size of The Chimney
The size of the chimney is one of the most important factors that need to be considered. A big chimney can suck up all the smoke but, if the chimney is small, matching the size of the hob, it needs to be displaced right above it, matching end to end.
In the same way, if the size of the chimney is smaller than the hob, then you need to match its center.
Height for Kitchen Installation
The distance between the cooktop and chimney should be accurate as it is an essential factor to check upon the efficiency of the appliance. If the chimney is installed too close to the cooktop, there is a risk of catching fire. Similarly, if it is installed too high, it will not be able to suck entire heat and smoke.
Ideally, the distance between the hob and chimney should be between 24-30 inches. Fixing it below 24 inches can increase the risk of fire explosion.
Mark the Points for Fastening the Chimney
The chimney installation kit consists of screws, stands, and various attachments to fasten the chimney. Use the measuring tools to mark the accurate positions on the wall. Identify the points for screws and use the drill to make holes for the screws. Do this process carefully without hurting your fingers.
Attach the chimney to the hood and move forward towards fastening the unit. Place the hood close to that wall and drill holes around 6 mm deep into the wall. Check if the chimney fits well or not. Fix the chimney permanently if you are sure of the arrangements.
A Duct of The Chimney
When it comes to the duct of the auto clean kitchen chimney in India, there are a few factors that need to look upon. Always prefer stainless steel and aluminum duct over PVC for their strength and durability. PVC can easily melt with excessive heat while suction.
Next, the length of the duct should not be more than 12 feet. Another thing that needs to be considered is the number of bends in the duct. The number of bends is inversely proportional to the suction efficiency of the chimney. A small pipe with a maximum number of bends is more effective.
Cut out For Chimney Duct
The cutting of the chimney the duct should be 6-inch-wide. It should be made at any external wall of the kitchen at a height of 7-feet above the floor. If you have a pre-existing hole then it’s fine. If not, make a correct hole at the correct space, in the correct position.
Also, you can use the already existing cut out hole of the exhaust fan to pass the duct through it. People who live in rented apartments should opt for a ductless chimney to avoid the hassle.
Once you are done with everything, check with the wiring of the unit and you are good to go.
We hope that this kitchen chimney installation guide serves you with all the relevant information.