We all have a wide variety of appliances at our home. From refrigerators to water purifiers and dishwashers, it is hard to imagine a kitchen without them. However, a gas stove remains the most basic and demanding kitchen appliance.
As we know, a gas stove is the primary source of cooking. It is widely used because of its easy and efficient heat control system. Let alone the bigger flaws, even a minor burner malfunction can make your daily job difficult. Sometimes, we notice that the flame of the gas has started flickering, or a burner has started producing low flame all of a sudden. Something like this can be resolved within 5 minutes, without any professional help.
However, check for simple solutions before undertaking any complex repairs. First of all, make sure the gas stove is plugged in properly and the ignition system is working well.
Most fixes are easy to diagnose and can be handled well without calling for pro service.
What are Common Problems?
- The flame of the stove is low or it doesn’t light at all.
- The flame puts off when it is kept in sim.
- Gas leakage.
- Restricted movements or breakage of knobs.
- Breakage of burners.
In this article, we will read about the simple solutions to these 5 most common problems. It will help you maintain and repair your gas range at home. But, before you undertake more complex repairs, make sure the gas range is properly plugged in and the flow of fuel is proper. Once you are done with the task, focus on the following issues.
1. Low Flame or No Flame at All
Even if you have the best gas stove in India 2022, you may face this problem. The valves of the gas stove often capture the dust inside them. The accumulation of dust particles in the inlet part of the tube can also cause the same issue. Both these issues can be rectified in just 5 minutes. In this case, they need to be cleaned thoroughly to ensure the sufficient flow of gas through them.
The job can be done with simple household items such as a screwdriver, safety pin, or a spanner.
2. If the Flame Puts Off When it is Kept Sim
This may appear simpler at the first sight but it can be really dangerous. We put gas on sim when we need less heat. It is the most optimized way of controlling the flame. The flickering flame leads to leakage which can be really dangerous.
If you experience any such problem; make sure to clean the dust from the valves.
3. Leakage of Gas
If you have noticed the pungent smell of gas in your house or kitchen, then you need to identify the source of the leakage first.
Leakage Can Happen from four points:
- Near the valves of the store
- Near the gas pipe
- Near the regulator
- Near the rotate nozzle
Follow these instructions to avoid any such situation:
- Keep checking the pipe of your gas for any breakage or damage. Use a high-quality pipe and change it on regular basis.
- Any fault in the regulator can lead to drastic damage. Smell around it and change it as soon as you notice any foul odor.
- There are rotate nozzles on the backside of the gas stove. Damage in these nozzles can lead to leakage.
4. Breakage of Knobs
Breakage of knobs is not frequent or common as such, however, the valves inside the knob may get jammed. Regular cleaning or servicing of the stove is necessary to avoid any such condition.
Then, there are bottoms below the burners that may get rusted or bend due to overheating. Either buy gas stoves with aluminum bottoms or take extra care of them while cleaning.
5. Breakage of Burners
The excessive flow of heat can damage the burners depending on their quality. Sometimes, the holes of the burners become closed. A small needle can solve your problem. Clean the tiny holes of the burner with this needle and get rid of the leakage or flickering issues. Also, you can use a stiff toothbrush to finish the task more efficiently.
We hope that this troubleshooting guide will help you conduct the basic gas repairs at home. No matter what is the cause, this article will help you identify the source of the problem and get rid of it.
Also Read :-
Leave a Reply